2003 Volkswagen Passat "vw 2 auto" Questions

Ad

Question about Volkswagen Passat

1 Answer

...VW Passat? YOU NEED A OBD 2 CODE SCANNER.YOU PLUG IT TO DLC TERMINAL UNDER INSTRUMENT PANEL.LOOK FOR 16 PIN DIAGNOSTIC CONNECTOR.THAT WHERE CODE SCANNER PLUGS IN TO.TO SAVE YOU MONEY AUTO ZONE OR ANY ...

Ad

vw passatt-2.0 turbo-need coding for abs module-vehicle has auto hold emergency brake The only 2 methods I know of to obtain coding for any control unit (and they both require the use of a code reader

Ad

...VW Passat Sedan 1.8 Turbo - I have had a mechanic tell me that the ECU needs replacement but that he can't do it b/c the ECU must be matched to the ignition key and that this type of repair service ...

Question about Volkswagen Passat

1 Answer

VW Passat misfire The car has a sputtering hesitation during initial acceleration. Auto Zone reading says Misfire in chamber #2. I changed the plugs and there was oil in my #2 plug slot. Assuming that

Question about Volkswagen Passat

1 Answer

...VW Passat is giving me problems starting, at times. the 2 bolts that secure the ignition switch to the steering shaft came loose causeing it to have a delay when starting..it would sound liek it was ...

...a minimum of 6 miles of driving on them before the level is checked. The engine is running when you check it. The 20*C mark is the cold level. VW recommends this be done every 2 years or 30,000

Question about Volkswagen Passat

1 Answer

VW Passat and when I start to drive the car acts like a manual and it is an automatic. Now it has on the gears D,4,3 & 2 what is that about? you have effectively got two gearboxes in the car.1is a

...vw passat has sparks coming from what appears to be the starter or is it the selonide.. are they one part bought together or seperate.. gonna fix this peice of **** myself.. Hello! The starter motor ...

...VW Passat. I cheecked the gas cap first. I unscrewed and then screwed it back to make sure it was tight. Since the light didn't go out I went to Auto zone. They said it was the gas cap but now shows ...

Question about Volkswagen Passat

1 Answer

2 VW's a year) and have the timing belt inspected.If you have never changed one, this is not the make of vehicle to start with.VW's have zero-tolerance motors, better known as interference motors, i.e

Not finding what you are looking for?
2003 Volkswagen Passat Logo

1,649 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...