...size i need to know about? You will need a 7mm allen wrench to remove the caliper and the bolts come in from the back side once the two bolts are removed and you slide the caliper off you can use a ...
size allen wrench to take off front disc brakes on 2000 chevy silverado 4.8 l The caliper guide pins will usually have either a 3/8 inch or a 5/16 inch allen head bolt. If the brake calipers are found
Question about GMC Cars & Trucks
What size Allen wrench needed to loosen front disc brake calipers on a 1987 GMC Sierra Usually a 3/8 allen head socket works.
size allen needed to remove break pads Allen wrenches usually come in a set, try 3/8. Victor, Front caliper are normal hex bolts 13 mm/1/2", 15 mm head on caliper bracket. Rear caliper 14 mm hex head,
...bolts holding the caliper and what size socket is needed? They may not be bolts, might be the allen wrench type, on the back side of the calipars, one on top and one on the bottom. Not sure what
...size hex or allen wrench is needed to remove the front disc brake pads ,on a 1995 mercury villager.Thanks ! Jerry I'm guessing 7 mm torx from factory, but some are hex after calipers are replaced. ...
what size wrench do i need to loosen the caliper bolts on the front disc brakes? I believe it is an allen key on your model!! And it is a 3/8"
allen hex head, metric. They come in a set with 4 wrenches, sized from 7 to 10 mm. and 4 inches long just for brakes. Sears has them I think. Your Ford has different size bolts front and rear. The set
...size allen wrench do i need for the front brake calipers For front brake pads replacement you only need usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need ...
...allen key size for the caliper? For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special ...
1,421 questions posted
Usually answered in minutes!
644 Questions
543 Questions
519 Questions
376 Questions
373 Questions