2005 Pontiac G6 "need ignition lock cylinder" Questions

Question about Pontiac G6

How do I replace the ignition lock cylinder on a 2008 Pontiac G6 when the key won't turn but the steering wheel isn't locked?

...ignition lock cylinder on a 2008 Pontiac G6 when the key won't turn but the steering wheel isn't locked? Anonymous Jan 18, 2022 You call a mobile lock-smith Try giving it a shot of WD40 using the ...

Question about Pontiac G6

1 Answer

2005 Pontiac G6 wont turn ignition cylinder with

...ignition cylinder with key. Tried to move shifter back and forth , pressed brake pedels , emergency brake. Still nothing. I am thinking its a locksmith issue. Any ideas? Thanks. Try turning the ...

Question about Pontiac G6

1 Answer

Engine light and traction control system off light on

...ignition coils on and off and on and of and...you get the picture.... Anyway, this type of operation can produce engine damage and wreck your converters....This is where the reduced power mode comes ...

Question about Pontiac G6

1 Answer

New Ignition Cylinder doesnt click in?

...need help? Lock Cylinder Functional Removal NOTE: The following procedure applies to vehicles that have functional ignition switch lock cylinders (11582), lock cylinder keys are available for these ...

Question about Dodge Cars & Trucks

4 Answers

I have a 1998 Dodge Intrepid that we have lost the keys for and I went and purchased an ignition lock cylinder how do I replace that without a key

ignition lock cylinder. You will need to use a small tool, such as a slim jim or a coat hanger, to manipulate the lock cylinder so that it can be removed. With the lock cylinder removed, you will need

Question about Pontiac G6

1 Answer

2004 Saturn Vue my key wont turn on engine, problems leading to this often won't start have to reinsert key then it works sometimes key falls out and car still running?

need a new key an lock cylinder . Jeff Armer Nov 03, 2023 https://www.partsgeek.com/catalog/2004/s... It is a known issue Ignition cylinder replacement DIY? - SaturnFans.com Forums SaturnFans.com http

Question about Pontiac G6

1 Answer

I have a 2002 taurus. I removed the ignition lock cylinder but the gear came out with it. I need help on how to time the gear back into its proper setting.

ignition lock cylinder but the gear came out with it. I need help on how to time the gear back into its proper setting. Car had been broken into. Ignition lock cylinder replaced. New key programmed to

Question about Pontiac G6

1 Answer

2000chevy malibu keyless entry problem need help

...need help 1. Close the vehicle doors. 2. Turn ignition to the ON position then OFF. 3. Remove key from the ignition. 4. Press and hold the driver side door lock switch in the UNLOCK position until ...

Question about Pontiac G6

1 Answer

Need to replace ignition cylinder.

need to replace ignition cylinder. no keys This is not an easy repair due to anit theft requirements. need to chisel off bolts. Section 11-04: Steering Column1997 Probe Workshop Manual REMOVAL AND ...

Question about Pontiac G6

1 Answer

How do you replace the

Ignition Lock Cylinder Removal & Installation To Remove: Disconnect the negative cable from the battery. Disable the supplemental inflatable restraint (SIR) system. Remove the steering column trim