Question about Pontiac Vibe
...install a new gasket and put it back on. Do not tighten the bolts too tight because it will distort the gasket and it will leak. Pour about 5 quarts of transmission fluid in the trannsmission and ...
...new gasket is being installed, start the gasket into the oil pan groove and work the gasket into the groove in both directions. Once the gasket is exposed to oil, it will expand and no longer stay in ...
...Remove oil pan bolts, remove old oil pan gasket, install new gasket, install oil pan, tighten oil pan bolts to 17 ft. lbs. DO NOT OVER TIGHTEN as this will distort the gasket and cause another
gasket matting surfaces install new gasket to pan and install. torque the bolts to 10ft lbs torque I think or until the bolts are tight but the gasket is not being pushed out from between two surfaces
...new gasket is being installed, start the gasket into the oil pan groove and work the gasket into the groove in both directions. Once the gasket is exposed to oil, it will expand and no longer stay in ...
...and damage. Remove engine oil pan and gasket. Remove oil and filter. Clean oil pan. Install new gasket. Add new engine oil and filter. Run engine to operating temperature and check for any oil
...INSTALL THE NEW FILTER.THEN WITH NEW GASKET ON OIL PAN IN PLACE.OIL PAN NEED TO BE CLEAN SO THE GASKET ADHESIVE WILL HOLD PAN GASKET IN PLACE WHILE INSTALLING PAN AND GASKET TO TRANSMISSION.INSTALL ...
...new gasket is being installed, start the gasket into the oil pan groove and work the gasket into the groove in both directions. Once the gasket is exposed to oil, it will expand and no longer stay in ...
...install a new oil pan gasket on a clean surface-V8 engine shown Remove the exhaust cross-over pipe. Remove the left engine-to-transmission strut. Remove the bolts and lower the oil pan. Thoroughly ...
423 questions posted
Usually answered in minutes!
349 Questions
282 Questions
169 Questions
88 Questions
53 Questions