2002 Oldsmobile Bravada "disengage 4 wheel drive" Questions

2000 bravada, 4 wheel drive will NOT disengage, help try putting in 2 wheel, make sure hubs are locked if you have manual locking hubs, then drive backwards 4-5 feet and it should disengage then.

...Sounds like the same problem I had. It was a swithch that engages and disengages the 4 wheel drive. Your switch is bad and is locked in 4 wheel drive. It needs to be replaced. Cost me $700 to fix

4 wheel drive will not disingage ABS light is on due to a bad or dirty ABS sensor on the front wheel hub. Inspect the front wheel ABS sensor and wire leads on the front wheel inner hub where the speed

4 wheel drive will not disengage, check engine light is on, but not awd light Your transmission and transfer case have sensors that will send a trouble code when one or both has a problem. Have it ...

...disengage the 4 wheel drive will not change back to regular driving, what can I do? Is there a way to manually disengage? I really do not care if the 4 wheel drive works. Once you turn off four wheel ...

...disengage from 4 wheel low, how can I get my Explorer to disengage from 4 wheel low? The other day I used my explorer in 4 wheel low and now it will not disengage. The indicator light, regardless of ...

4 wheel drive won't disengage With the recent snow here in Maine I engaged the 4 wheel drive on my Jeep and it never engaged. I got out of work and it was in 4 wheel drive so I disengaged it. I got ...

...disengage from 4 wheel drive (low) to 4 wheel drive (high) and then finally to 2 wheel drive. It is critical to shift transmission into neutral when switching out of 4WD Low, as indicated in your ...

disengage 4 wheel drive does not disengage Best way to fix it is to lift one side of the car using a jack. Get front and back wheels off the ground. Then put the car into neutral and out of four wheel

My 4 wheel drive is stuck in low gear and when I disengage to2 wheel drive the 4 low starts blinking. When I start driving I can feel that it didn't disengage. whats wrong have you check the fluid?