hot terminals at the relay, then start looking for a bad wire from relay to pump, or a bad ground for the pump, or a bad ground for the relay's coil side. Post back if unclear or other questions. When
Question about Oldsmobile Silhouette
...wire with your hands. Just sit it down and watch. You should see a clear spark between the electrodes. If you don’t, then you have an electrical problem, also test cam and crank sensors. Check air ...
Question about Oldsmobile Silhouette
...hot coolant temperature. Appreciate help on this one... Should I replace the 2nd crank position sensor that is behind balancer? DTC P1374 The 3X reference signal is produced by the ignition control ...
...hot wire a 87 ford ranger 2.9 4x4 fuel pump? How do i hot wire a 87 ford ranger 2.9 4x4 fuel pump? Power from battery to what wire on the fuel pump? thanks got 1987 ford f-150 no power to fuel pump, ...
...hot wire to provide electricity that passes through the contact to the fuel pump. Obtain a electrical wiring schematic for the truck then identify the wire that should be hot and trace the wire to ...
Question about Oldsmobile Silhouette
...all ground wires replaced fuel injection relayreplaced pressure regulator can hot wire fuel pump and car will start if you can hot wire it then you should check your power source to the fuel ...
Question about Oldsmobile Silhouette
...good. The wire should not be hot until the relay is triggered. The relay does not get triggered until the ignition key is turned on. It will run for 3-5 seconds or until the system pressure it at
...wire is hot and thats it should my red wire be hot for a second when in the on position on the key? The engine computer turns on the fuel pump for 3 seconds when you turn the key to "ON". If the ...
Question about Ford Cars & Trucks
...hot wire? Why do you want to hot wire the fuel pump ? Did you check the fuel pump relay ? How about the inertia fuel cut off switch ? Do you know what inertia fuel cut off switch is ? Go to ...
minutes, fuel pump will hum & engine will start when ignition is turned on. Check the wiring between the fuel pump and the wiring harness, this sounds like a short or wire melting to something hot
609 questions posted
Usually answered in minutes!
601 Questions
450 Questions
322 Questions
268 Questions
211 Questions