2000 Oldsmobile Silhouette "turn signal flasher anything brake" Questions

...turn signal light the vehicle starts and runs fine,just blows the 15 anp fuse for the brake lights. emergency flasher, all 4 lights operational. but no blinkers otherwise. while running interior ...

...turn signal flasher modules have anything to do with brake lights? i've noticed my right turn signal flasher module making a fast clicking sound. i know from past vehicles it's going out and have to ...

...turn signal. When i turn signal on the front lights up and the indicator in the dash lights up but stay lit. Checked all bulbs and assume since the front lights up the fuse is completing the circuit. ...

...turn signal switch[columum switch]from wrecking lard[said they check before removing]plug it in same thing;;it doesn't have headlight washer but don't think that would have anything to do with ...

...turn signal fuse if you turn the left one on, and the fuse to the hazzard flashers if you turn them on. I've replaced the flasher, brake light switch, and checked just about all wireing. Please help. ...

...turn signal switch and go from there. Have you added trailer brakes or anything which may have spliced into any wiring if so I would have anything that was added disconnected and then I would check ...

...turn signals, brake lights and flashers are not working in the rear the relay is most likely the cause unless you have towed anything lately. I would also check the pigtail under the rear bumper for ...

turn signal lever rapidly. Not to the point of breaking it but you do want to apply a little extra pressure. move it in every direction for about 5 to 10 minutes. do not spray anything into the switch

...turn signal. Any suggestions I suspect there is a problem with the turn signal/ hazard switch. turn the turn signal on left or right, if it doesn't flash, grip the hazard button and gently wiggle ...

...turn signal light wire hook up to same wire on the light. (per instructions). But for the brake to work right I have to unhook the turn signals and vice versa to get the turn signals to work right. ...