2000 Oldsmobile Intrigue "signal plausible" Questions

Ad

...signal blinker problem. They work properly sometimes, and then other times they don't blink at all. I Changed all the bulbs, but it didn't seem to make any difference. I can manually blink the front ...

Ad

...plausible • 208 EWS -RPM Signal Error • 209 EWS -Message Error • 210 Ignition Feedback Resistor (ZSR) • 211 Idle Speed Actuator -Mechanical • 212 VANOS Bank 1 -Mechanical • 214 Vehicle Speed Signal ...

Ad

...plausible signal I have a 2006 vw Jetta 2.5, my engine light came up the other day and the body shop gave me these codes: 05568 mil request signal active check tcm for error. P1624 not a plausible ...

...plausible signal What should my next step be? bring back to where u had work done may have not reconnected sensor correctly or may have damaged wire /connector and or sensor while doing the ...

plausible signal. how do i fix it please, and where is it located. thanks This part does not repairing! Pressure sensor is in a before diesel particle filter in exhaust pipe lot of carbon smoke on the

Question about Cars & Trucks

1 Answer

Remote starter for my car won't work Remotes may dysfunction in area's with intervening signals e.g. wireless camera's or jammers like shop theft detection gates. Open the remote and inspect the ...

Question about Oldsmobile Intrigue

1 Answer

...signal i.e. going out of a plausible range. you could try removing the connector and reseating it. I've seen this a few times where just reseating the connector fixes the problem, if not it'll ...

Question about GMC Cars & Trucks

1 Answer

...state the switch contact is closed to the reference voltage circuit. Battery voltage on a switch signal circuit indicates to the memory seat module the switch status is active. Each seat adjuster ...

Question about Oldsmobile Intrigue

1 Answer

...PLAUSIBLE FUEL VOLUME SIGNAL, HOW DO I FIX THIS? Could be several things. Somewhere along the line your computer detected a communication malfunction based upon your fuel level. There are several ...

...? Likely to be the crank or camshaft sensor. A faulty sensor becoming unstable due to heat soak. Because of fault the engine will not start, as the sensor cannot give the ecu a plausible

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

1,429 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...