2000 Oldsmobile Intrigue "heavy snow wipers stop working" Questions

...This I started the car and the wipers were on but could not move the heavy snow. They stopped functioning at that point. Fuse maybe? over heating the motor then blown your fuse.change the

...heavy snow cover We had a heavy snowfall last night and I turned the windshield wipers on before I cleared the snow. They went up halfway and stopped working. I cleared the snow, checked the fuse, ...

...shorted and burned out. This one is very likely if the snow storm was heavy and you was driving in it. Cause- Moving large amounts of snow and ice off the window puts a heavy load on the wiper

...Heavy snow and when restarting the car they were stuck in up poistion and stopped working.. can hear motor running.. can move wipers by hand the pivots that hold the wiper arm are probaly stripped or ...

...snow storm 1998 Porsche Boxster windshield wipers stopped working. They slowed down for a few minutes then stopped working. Even the driver side wiper moved out of windshield and got stuck out of the ...

...of clearing it manually. When that is done if there is too much snow or it is a heavy snow the wiper motor will burn up or go bad due to the fact that it does not have enough power to do such

half way and stop, they would only work in continuous mode. now the wiper fuse keeps blowing weak or faulty wiper motor, or wiper motor under heavy load, clean out snow ice and debri then retry wipers

...snow by hand. the wipers won't work now. see if the transmission arms for the wiper motor are moving when the wiper motor is on. The bolts that hold the arms to the motor may be loose or stripped out ...

...heavy snow stopped working motor runs, wipers dont Probably stripped at the spline where pivots. Try getting arms off at the pivot point, cleaning, re-attach & tighten if there is a nut holding them ...

heavy. i turned on my wiper to brush the snow off. it worked and then stopped and never worked after that. i think i hear the motor running but wiper dont move at all. Sounds like you damaged the gear