2000 Oldsmobile Intrigue "fuse controls brake lamps" Questions

...fuse that controls the DRLs(check manual), if the fuse for that circuit is fine the next thing to check is the relay. Also if you have your parking brake slightly on, that can cause them not to turn ...

...cluster for the left turn signal. I've replaced the bulbs, checked the contacts, checked the main fuse panel, and for good measure gave the wires a solid jiggling. The center running lamp (yellow) ...

...Brake pedal position sensor is a input to the BCM .The BCM has battery voltage supplied from BCM fuse IBCM 1 fuse -fuse #20 30 amp ,located in the under hood fuse box. Stop Lamps The body control ...

brake lights were always on. It was the switch. The STOP LP 25-amp fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the

...brake lamp fuse to blow.If NONE of your brake lamps are working, the most likely causes are:> Fuse #46 open (blown)> Defective brake lamp switch> Bad ground connection at ground G400 (Left ...

brake pedal is applied. Battery voltage from the LT TRN/SIG and RT TRN/SIG fuses located in the rear fuse block is also used by the body control module (BCM) for stop lamp operation. Turn Signal Lamps

...BRAKE fuse located in the fuse block - underhood, supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and ...

brake lamp fuse and panel for a 2007 cadillac cts? running lights work but not brake lights, filaments aren't burnt. where fuse to stop lamps Kevin , this is a very complex way of stoplamp control , I

...Fuse 17 10amp protects the following 1)transmission control switch and lamp. 2)brake fluid level switch 3)warning chime 4)diesel warning lamps display 5)fuel water switch 6) low vacuum warning switch ...

fuse located for my brake lights on my 2007 Pontiac g6 and rear defrost fuse Stop Lamps your br The brake pedal position sensor is used to sense the action of the driver application of the brake pedal