2000 Oldsmobile Intrigue "ac clutch grinding" Questions

ac on---grinding noise under hood Causes of the grinding noise under hood when air conditioning turned on? AC compressor clutch slippage. won't last much longer- relpace.

...turning and rubbing against each other or something. I can also see metal filings or shavings. You have a failed AC compressor clutch

...ac compressor clutch that slipping when after it has been activated/engaged. This happens when the engine is winding up the compressor clutch is not engaging strong enough and start slipping. However ...

...grinding noises under front end when driving. Getting much worse over last 3 days. Also, on occasion, when I make left hand turn there is a very loud scraping noise on front left side. What's wrong? ...

...ac is off the clutch should spin freely if not then your compressor is junk. As for the slight grinding noise just to make sure with CAR OFF turn the clutch on the compressor and make sure its not ...

...CLUTCH ON MANUAL TRANSMISSION RELEASED.BUT RAISE THE HOOD LOOK AROUND ENGINE LISTEN FOR GRINDING NOISE FROM ALTERNATOR.AC COMPRESSOR PULLEY BEARING FAILURE MAKE GRINDING NOISE,CHECK POWER STEERING ...

...AC clutch if the compressor was shot was a good idea. The pulley should spin freely on its bearing without any problems. Replacing the AC clutch can be done but there are a lot of parts and stages to ...

ac compressor grinding You will need a new compressor clutch plate and pulley installed.If you attempt this the specs for spacing between the plate and pulley are 18-24 thousandths gap.You will also ...

Grinding noise when I shut the AC off I have a 99 Chevy prism check the bearings in the magnetic clutch on the the front of the AC compressor

AC clutch is grinding how do i fix? 1997 buick lesabre Remove the clutch with a clutch removal tool after removing nut. The pulley for the belt does not need to be removed. The clutch needs to be ...