2000 Oldsmobile Alero "engine 2" Questions

...engine) 2-----------1 4-----------3 6-----------5 (front of engine) Ignition Connections: | 5 - 2 | | 3 - 6 | | 4 - 1 | Let me know if this helped, or if you have additional information or questions. ...

...engine) 2-------1 4-------3 6-------5 (front of engine) Ignition Connections: (back) |(5)-(2)| |(3)-(6)| |(4)-(1)| (front) Let me know if this helped, or if you have additional information or ...

...engine light is on and it is running rough. The code says my problem is the number 2 cylinder. I changed the spark plug and with inspection I can see it is firing. I turned all the lights off last ...

ENGINE LOCK UP.TAKE A 1/2 SOCKET WRENCH AND 15 METRIC 1/2 INCH SOCKET.TURN CRANKSHAFT BOLT TO SEE IF ENGINE TURN OVER..IF NO ENGINE LOCKED UP OR NOT ALL THE WAY IN PARK OR YOU COULD HAVE FAULTY SAFETY

what is the diagram for 1999 oldsmobile alero firing order? OLDS ALERO FIRING ORDER 2.4 ENGINE FIRING ORDER IS 1 3 4 2 THE 3.1 AND 3.4 ENGINES FIRING ORDER IS 1 2 3 4 5 6

...2 is generally the side of the engine that doesn't have cylinder #1. Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time. You will more than ...

...of the engine just above the lip where the oil pan meets the block towards front of the engine, it has a 2 wire plug and a small bolt holding it in Fig. Showing the CKP Sensor Location on 2.4L ...

...2 weeks. runs good on highway. HelloWhen the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that ...

...2.2L Engine Before servicing the vehicle, refer to the precautions section. Disconnect the negative battery cable. Drain the engine coolant. Remove or disconnect the following: Exhaust manifold, if ...

TRANSMISSION JACK.YOU WILL NEED 2 JACK STANDS .ENGINE SUPPORT FIXTURE.OR ENGINE HOIST TO SUPPORT ENGINE TO REMOVE TRANSMISSION.AS A FRIEND I AM LETTING YOU KNOW WITH OUT THESE TOOLS THE JOB IMPOSSIBLE