2000 Oldsmobile Alero "axle" Questions

need to remove axle. got everything unbolted but cant get thr passenger axle to pull from tran.? You can carefully use a prybar or axle pickle fork to pry axle shaft from the housing of the ...

SURE SITTING ON LEVEL SOLID GROUND.BEFORE RAISING VECHICLE OFF GROUND YOU NEED TO LOOSEN HALF SHAFT AXLE NUT JUST A LITTLE BECAUSE WHEEL IN THE AIR HARD TO LOOSEN AXLE NUT WHEN YOU HAVE HOLD THE WHEEL

what size socket do i need to remove the axle nut to replace the hub assembly the axle nut size is 36 mm. What size socket do I need for my differential axle pinion nut on my 2010 Dodge ram 1500 ...

...sockets ext the right foot lbs of torque for the axel nut, TOOLS YOU NEED IS 35 METRIC SOCKET FOR AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD TO ...

how do you replace the transmission seal? YOU HAVE TO REMOVE THE FRONT DRIVE AXLES.YOU NEED TO BUY THE SEAL REMOVING TOOL PRY SEAL OUT TRANSAXLE AXLE HOUSING. GO TO ANY AUTO PARTS STORES THEY WILL ...

...part from a local O'Reilly's or Autozone? the spindle nut is what hold the rotor in place on the axle. they can't really "go bad" unless its been overtorqued. you should be able to buy a new one

HOW DO IREPLACE A 2003 ALERO CV AXLE ON M RIGHT SIDE ON THE CAR ON THE PASSENGER SIDE Here's a link on removing your cv axle. ...

as i drive Not from the engine but from the front axel.. sounds like the cv joints have gone bad on axle, get underneath and grab the axle and see if it wiggles or moves. if its a howling noise, its a

HOW DO i REPLACE A CV AXLE ON A 1999 OLDS ALERO first of all you will need a 1/2 break bar and a 35mm metric socket.besure to buy the socket that you use to remove front axle nut.any other socket may ...

trying to put tranny fluid in my transmition there is a plug by the right axle under the car,lift up the car leveled at least one foot high and safe enough start the engine remove the plug pour oil in