...noise when the engine is running. Please read other expert suggestions on what products to use to stop the tapping. Use Casite brand "Motor Honey" - Add one quart to your oil. I don't recommend STP ...
...the tappet is sticking as hyundais have trouble getting oil round the engine this wont stop the problem but will make the noise go away until you can get the tappet replaced Try lifter free
...tappet on my range rover v8 how can i stop it The tappets are worn out! so they can not fill with the oil to eliminate the clearance between the tappet and the rocker arm! change them! Replace the ...
Question about Renault Cars & Trucks
...tappet noise (clapping) which faded away on my Renault Modus 1.4 16v, should I be worried ? It only has 37 000 km driven very civil. Wherever the engine stops at least a couple of valves will remain ...
...stop rattly tappet noise? Does anyone know of an online English repair manual? I've just bought this van and when I heard a slight tappet noise develop I added some oil (level was low) to try ...
Question about Oldsmobile Intrigue
...goes away what would cuase this? Usually a ticking from the engine is caused by oil not coating the tappets. Tappets are the rods that control the intake and exhaust valves. Once the engine warms up ...
Question about Oldsmobile Intrigue
...stop. Car drive fine and no heating up. Thank you any help you can offer. The noise you describe may be due to hydraulic tappet leak back form a oil that is of the incorrect viscosity or a cheap oil ...
...Tappet noise is not load dependent and tends to fade as the engine speed rises. Noise that worsens as the engine speed rises but is not load dependent is usually at least one bad camshaft lobe. Noise ...
my car is making a ticking noise It's most likely your tappets! Check your engine oil level, when this is low the hydraulic tappets get noisier or they could be just worn! If there is a crack on the ...
...noise that goes away when they get warm or fill back up. Valve tapping/ticking noises possible causes ,dirty oil plugging lifter, collapsed lifter, faulty lifter, bent push rod, broken/worn tappet, ...
1,182 questions posted
Usually answered in minutes!
988 Questions
835 Questions
385 Questions
322 Questions