1999 Oldsmobile Intrigue "remove starter" Questions

Ad

Question about Oldsmobile Intrigue

1 Answer

...Remove the starter solenoid S terminal nut. Remove the starter solenoid S terminal wiring harness connector at the starter motor. Remove the starter solenoid BAT terminal nut. Remove the starter ...

Ad

Question about Oldsmobile Intrigue

1 Answer

...remove the bolts. There are 2 wires attached to the starter. I used an 8mm socket (but a deep socket, the kind of socket that is ~3" long) to remove the small wire. I used ~11mm socket (deep socket) ...

Ad

Question about Oldsmobile Intrigue

1 Answer

...Remove the starter and inspect the teeth on the flywheel if the teeth are worn the transmission will req removing and a new flywheel fitting try putting the vehicle in gear and rocking it this will ...

...Remove the starter. Remove the wore plug into the sensor. The sensor has 1 bolt holding it in. Remove the bolt, you may have to wiggle the sensor at the base a bit as you pull it out. Replace, and ...

Question about Oldsmobile Intrigue

1 Answer

Remove the starter. Remove the wIre CONNECTOR plug to the sensor. The sensor has 1 bolt holding it in. Remove the bolt, you may have to wiggle the sensor at the base a bit as you pull it out. Replace,

Question about Oldsmobile Intrigue

2 Answers

...starter is removed: 1. Unplug battery cables 2. Lift the front of the vehicle (make sure its secure and safe) 3. Remove the two retaining bolts (this starters bolts, bolts up into the engine) 4. ...

Question about Oldsmobile Intrigue

2 Answers

...remove the starter to get it out Not sure, but even if you get it replaced there is a "learn" procedure that must be run to calibrate the new part. I didn't have the instrument to do it, so I had to ...

Question about Oldsmobile Intrigue

1 Answer

...remove a starter on a 2001 Oldsmobile Intrigue? Follow the red positive cable from the battery to the engine. It is mounted to the engine with bolts. Disconnect the battery first. Then you can remove ...

Question about Oldsmobile Intrigue

1 Answer

remove the starter. Once the starter is removed the sensor is visible. Because of the poor location and poor GM engineering these sensors fail. You have excessive heat from the exhaust and oil leaking

Question about Oldsmobile Intrigue

1 Answer

...sensor located It is on the front of the motor under the manifold, you have to remove the starter first then it is right there on the block. make sure you diconect the battery befor removeing ...

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

1,182 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...