2005 Nissan Altima "throttle position" Questions

...throttle position sensor, etc. The throttle control motor is operated by the ECM and it opens and closes the throttle valve. The throttle position sensor detects the throttle valve position, and the ...

throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected. OPERATION PROCEDURE 1. Make sure that accelerator

Throttle Pedal Position Sensor/ Switch D / E Voltage Correlation. Replace the Throttle Pedal Position Sensor/Switch.Remember to have the set code Cleared from the cars computer, this will turn off the

...throttle position or throttle plate angle data Still should start,just not be able to use it very well After all that ----------you know how to fix it----------- You have used local shops & ...

...Throttle Position Sensor Circuit P1125 Tandem Throttle Position Sensor Circuit P1132 Intake Valve Timing Control Position Sensor (Bank 1) P1135 Intake Valve Timing Control Circuit (Bank 2) P1137 ...

...at all? the system is electrically operated via a gas pedal position sensor and throttle actuator motor on the engine, most likely cause is the motor for the throttle under the hood is

...also throttle position sensor may be faulty. Is the O ring bad cause oil to leak into chamber one and will throttle position sensor cause car not to start? yes that is why it smoke and yes for ...

...throttle position indicator at the pedal itself, wiring problems between the pedal and the PCM and the actuator to the throttle itself. You will also need access to a manual, and a good digital volt ...

throttle positioning sensor see the position throttle sensor:

Throttle Position (TP) sensor is a potentiometer. It is mounted on the side of the throttle body and is connected to the throttle plate shaft. The sensor monitors throttle plate movement and position,