...Pictures would help, too. It is small and round (2 wire connector) and located either in the flexiable air intake hose to the engine or in the engine air filter
were is the trasmation fuild stick at the dipstick is near the firewall on the drivers side of the engine compartment behind the flexiable hose that delivers air to the engine, it has a plastic handle
...paint supply, look in the phone book, they will have a product made by 3M chemicals that is called flexiable parts repair putty, it is a special epoxy used to repair these
...a K&N air filter in my 2001 Audi S4. Where is the original filter located? there is a large round flexiable hose that goes to the engine, at the other end of that hose is the rectangular shaped air ...
...Pontiac Montana. Where is the release point to start? there is a tensioner in the system it is a flexiable arm with a big spring in it and a pulley attached put a socket on a braker bar and move ...
...ss. and what type of paint should i use? U can paint them, u must use a special paint that is flexiable and designed for plastic trim, u must also buy a special cleaning and prep cleaner that ...
Question about Nissan Altima
...then it must be bled to release the piston pressure again. if the caliper is ok it sounds like the flexiable hose is restrcted by the metal crimps on the hose corroded and crushing the reinforced ...
...fine. it took a couple of fill ups before the light on the dash went out by itself. there is a flexiable plastic vent tube that runs along the fill pipe where u fill the tank, it lets air out
2,513 questions posted
Usually answered in minutes!
1,450 Questions
1,306 Questions
569 Questions
534 Questions
410 Questions