2003 Nissan Altima "removing head 2002" Questions

...2002 Altima 2.5L? Both heater hoses are hot but no heat. Pressure test the cooling system. Remove the spark plugs and inspect the top of the piston. Look for coolant. If you can see your own eye you ...

...head. Fig. Removing the front suspension member-Altima Fig. Cylinder head bolt removal sequence-2.5L engine-Altima and Sentra Fig. Cylinder head bolt tightening sequence-2.5L engine-Altima and Sentra ...

...2002 Nissan Called the auto parts stores they all claimed they could get the seals, but weren't able to get a part # to order them & they also didn't come with the valve cover gasket. ...

How do you change an indicator bulb in almera Phillips head screwdriver remove lens cover twist globe anti-clockwise

...removing the o2 sensor befor the cat and look in the hole. if there is any deformity to the cat ( melted, holes, missing) replace it right away the nature of the 2.5l it sucks the cat matirial back ...

2004 NISSAN ALTIMA 2.5 NO CABIN HEAT..ENGINE AT OPERATING TEMP. THERMOSTAT GOOD COOLANT LEVEL GOOD..HOSES INTO HEATER CORE COLD water pump is bad.....or thermostat is not opening.... If the engine is ...

rattling noise at rear head code for timing conterol soleniod replaced solenoid still has same rattle code for solenoid is gone now it has a code for both banks intake timing to advanced cams seem to ...

...of the head light which you can not see with the bumber on. if you press down hard enough you could stick an extention with a 10 ml socket so you can remove the bolt without removing the bumber

...head gasket. top off your coolant overflow bottle. run vehicle as if nothing was happening and in few days check level of coolant in the bottle. OR you can check the cylinders for coolant intrussion ...

2002 pathfinder when it sits for a long period of time n i start it it blows alot of white smoke through exhaust other than that it runs fine White exhaust smoke usually comes from coolant in the ...