...torque sequence 99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in.
Question about Nissan Maxima
...w/5.7L engine (old body style). Thanks! On 5.7L engines, install the bolts and torque in sequence as follows: Step 1: 71 inch lbs. (8 Nm). Step 2: 106 inch lbs. (12 Nm). Step 3: 11 ft. lbs. (15
...TORQUE SEQUENCE --------- | 6 2 3 7 | | 5 1 4 8 | --------- STEP 1: TORQUE IN SEQUENCE TO 33 FT/LBS STEP 2: TURN AN ADDITIONAL 90 DEGREES RECHECK FINAL TORQUE IN SEQUENCE *** CAUTION *** ENGINE USES ...
...a 99 3.0 honda accord Hello joee105, The head bolt torque is a three step procedure: 1. 29 ft. lbs. 2. 51 ft. lbs. 3. 78 ft. lbs. See image below for torque sequence. I hope this helps. Regards, ...
...torque to 20nm ----------- Stage 2 - wait 3 minutes.---------- Stage 3 - fully slacken all bolts in sequence------- Stage 4 - torque to 20nm-------- Stage 5 - tighten by 97 degrees (plus or minus 2 ...
torque specs of the 99 isuzu trooper head bolts Sequence 7 3 1 5 9 8 4 2 6 10 Torque First Stage 57.8 ft lbs Second Stage 72.3 ft lbs
...torque-to-yield designed and cannot be reused.Tighten the cylinder head bolts in the sequence shown in three steps, as follows: Step 1-27-31 ft. lbs. (37-43 Nm). Step 2-tighten an additional 85-95 ...
...torque specs for the main and rod bolt for a 99 escort 2.0l engine engine tightening torques Main bearings Renew bolts/nuts No Main bearings Stage 1 43 Nm Main bearings Stage 2 85 Nm Big end bearings ...
...torque converter is in all the way. It should spin freely and be about 1/2 - 1/4 inch away. You can either put a big socket on the bolt in the front of the harmonic balancer and turn the engine to ...
745 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions