2002 Nissan Maxima "replacing alternator belt" Questions

...assembly. If the A/C compressor belt is blocking the removal of belt, loosen up the compressor and slide it to free up the belt! Now u could replace the alternator belt! Installing will be

...alternator belt idler pulley. Slip the drive belt off the alternator pulley. Remove the four air conditioning compressor mounting bolts. Remove the radiator fan and fan shroud. Move the air ...

alternator forward,, 3.) remove that belt (TAKE NOTE WHERE IT GOES) 4.) slacken compressor or power steering pump,, 5.) push forward,, remove that belt (TAKE NOTE WHERE IT GOES) 6.) replace bolt belts

...AND REMOVE THE ALTERNATOR FROM VECHICLE.VISA VERSA PUT EVERY THING BACK.AND ADJUST ALTERNATOR BELT TENSION.WARNING DONT PUT TOO MUCH TENSION ON BELT.BECAUSE YOU WILL DAMAGE ALTERNATOR PULLEY

...replacing all the belts also. 1st belt, remove coolant reservoir. Loosen the pulley next to the res. then there is a tension bolt behind it. get under the car, the alternator is right there on the ...

...belt for cracks etc on inside once removed. if damaged replace. Proceed and remove cowls, bolts etc as required to remove alternator. Before removing disconnect wires on Alternator. Assemble in ...

was fine this morning. Could it be the belt? Replacing the alternator would be much more expensive. took it to a repair shop. they replaced the belts and the alternator, which was apparently bad. ouch

alternator and air conditioning compressor Disconnect the negative battery cable. Loosen the idler pulley bolt. The replacement of the inner belt on multi-belted engines may require the removal of the

...put the belt on the pulley and use the top bolt. You will need to tight the bottom bolt, than pull the alternator with some bar but gentle to get the belt tight, hold it and than tight the top

...belt replacement 2000 nissan maxima serpantine belt & altanator replacement the serp belt tensioner is a 12mm or 13 mm bolt that your loosen and move the alternator forward to slack the ...