2001 Nissan Maxima "idle air control" Questions

...the missfire. it could be a vacume leak or a bad idle air control motor. id check the throttle body for cracks and any vacume leaks at all. if your sure its ok,then an idle air control may be ...

...idle air control [iac] system higher than expected-[-on the nissan altima it is known problem-usually have the dealer perform an idler air relearn procedure-] but the problem can be vacuum leak-leak ...

...idle air control valve.  This valve could be faulty or the throttle body could be dirty and not allowing air to enter thru the valve.I would start with checking the idle air control valve and ...

...have an idle control sensor? Where would it be located? no idle control sensor but it has both an IAC, idle air control valve and a T, throttle position sensor both are located at the throttle ...

how can i find a picture of an idle air control valve 01 maxima idle air control valve 2001 maxima You can go to a Nissan Dealer and they will print one out for you, I have done it before.

p0505 code P0505 Idle Air Control System Malfunction That points to either an unplugged or bad Idle Air Control Valve (IACV).

...idle air control motor where is it located on the motor The idle air control motor is typically located on or near the throttle body. The throttle body is where the rubber or plastic tube from the ...

when driving, the engine stalls while at a stand still and in gear. Replace your IAC motor. This is the "idle air control"motor. This control the amount of air needed to keep the vehicles idle stable

...Idle air control motor...the TPS and the Intake air temp sensor. Is there a way to check these parts without computer in the car? They say that computer will or could Fry again if I dont....p.s. the ...

...Idle Air Control motor (inside the throttle body) controls idle using a variety of inputs through the Powertrain Control Module. Rough idle and stalling most often occur when the idle speed drops ...