...and injector still miss fire so I hook a noid light to it, it won't light up at all can it be the ECM and if you think it is where is located in the vehicle I don't know where it is, probably under ...
Question about Nissan Quest
had to replace ecu / ecm car stay now at low idle handler thinks throttle body issue also replaced spark plugs could replaced spark plugs , recentlly had to replace the ecm our van now stays at low ...
...you, or a friend did the repair and don't have the equipment, ( like a dealership ), to update the ECM, ( Electronic control module, also refered to as the computer ), you will most likely need to ...
where is the ecm located on a 2000 nissan quest? where is the ecm located? Should be behind the glove box.
where is the ecm located on a 93 nissan quest gxe minivan if it is like my Quest 1999 model it is behind the glovebox. need to open glovebox and carefully move stop tabs a little to go around frame ...
...got a used one today after a long wait. That is a NATS code. have the keys initialized for the ECM. The car will not run if the keys are not registered to the ECM. Unfortunately you have to get ...
or a defective MAF sensor. I have included the relevant pages from the manual. CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's
trouble light the overdrive light either blinks or stays on for a short time when my wife starts our 2000 nissan quest. No other known issues. Have the engine and trans ECMs scanned, could have a code
...a noid light to it it does not light up at all but shows I got power going to it, so can it be the ECM if it is where is located Could be ECM or
...I towed to Visalia of Nissan. Here is their findings. "Found that van has not fuel or spark Checked ECM and it working ok checked cam sensors and crank sensor it was working normal allso checked ...
312 questions posted
Usually answered in minutes!
436 Questions
322 Questions
285 Questions
217 Questions
190 Questions