1992 Nissan Pathfinder "remove push rod clutch master" Questions

...push the piston in,on the master cyl and hold it in the depressed position.Some fluid and air will shoot out the output port.Now take your latex glove clad finger,and press it firmly over the fluid ...

The master cylinder is mounted directly behind the clutch pedal in the fire wall. A push and twist design. If you are intending to remove it don't forget to unplug the sensor(mounted on the rod) first

remove clutch pedal Detach the Master push rod from the pedal and remove the Master. There will be the clutch position sensor to unplug and 3 nuts, one inside of the fire wall, and two outside I think

...remove pipe from master cylinder . disconnect clutch pedal push rod from cylinder , remove bolts holding cylinder to fire wall remove cylinder. wash off any fluid with water as it will damage paint

...cylinder and take the pin out the cluck pedal so you can remove the push rod and fit it back into the master cylinder that way,, you will need to blead the cluch after refitting the master ...

...push rod to the clutch pedal . thanks for any help or suggestions It is fairly easy to do the clip on the the rod is one of the hardest parts to remove and it is hard to tell you alot more because ...

...remove hose, then open the bleeder valve on slave) and see if your pedal operates now.  Use a can to catch fluid if you don't want it to spill on floor.  If the pedal still ...

the clutch master) push rod attached to the clutch pedal) . try to see if there are any leaks around it. if so have it replaced and have the system bled to remove all fluid and air stuck in the system

...remove the inspection cap to look at the slave cylinder, it was also very dry. I can't find any leaks. Always either removing the cap lets it work or bleeding the master cylinder will do it(done this ...

...Remove clip securing clutch master cylinder push rod to pedal and slide push rod off pedal pin. (9) Disconnect clutch pedal position switch wires. (10) If pedal pin is equipped with bushing, ...