...1994 Mercedes c 180? 2. I have a little problem getting my car into first and second gear? Can the clutch be adjusted to sort this out, and if so, how? Thanks for any advice 1. unbolt seat unplug ...
clutch pedal gone limp,hydrolic clutch check the slave cylinder... also unhook the line going to the slave and see if the petal gets hard? if it don;t then change the clutch master cylinder
...the ac off go under the hood and look at the ac compressor. Look at it good and you will see the clutch is not spinning. Now go in the car and turn the ac on max, when you go under the hood again
where is the location of the place to put in clutch fluid it is brake fluid container, the same fluid for brakes and clutch.
clutch pedal fallen to floor and not been able to change gear. Clutch or slave cylinder failure is the most likely cause.
the clutch is sticking to the floor and I have to manually lift it. The car gives high revs but does not produce much power Clutch slave cylinder needs bleeding or replacing.
wheres the clutch fluid tank on a mercedes c200? my clutch pedal keeps sitting on the floor and i have to manualy lift it up !!! clutch fluid or cable ??? most likely a bad clutch master ...
...noise and the gears don't seem to be kicking in. The car is an slk automatic It seems that your clutch plates have worn out. The automatic gears system uses a centrifugal clutch which ...
Question about Mercedes-Benz C-Class
1996 mecedes c 180 shuts power when i press clutch to change gear at times stating is also a problem just I would like to ask you a question before giving any answer. Do you have the power shut off at
247 questions posted
Usually answered in minutes!
630 Questions
615 Questions
474 Questions
420 Questions
413 Questions