Question about Mazda Tribute
...with a new crankshaft pulley. NOw it won't start. Any ideas check for damage /wire connections to the crank shaft position sensor near the harmonic balancer pulley. Check the air gap of the ...
Question about Mazda Tribute
...but how do i know which is tdc The crankshaft pulley keyway is to be set to 11 o'clock for TDC of no. one piston. Follow the diagram on page 2B-9 of the Haynes Manual for the camshaft timing
crankshaft seal or timing cover. The belt and drive pulley get oil on them (not an oil spill). Is this problematic with the V6? Approximately what does a repair for this cost? Thanks, Ron if you do it
...pulley and crankshaft are kept in alignment. Once the crank has been indexed, you can set up cams, following timing chain replacement instructions in your manual. Once this has been completed, turn ...
crankshaft pulley there is a keyway on the gear turn the key way straight up. Take the spark plug out of the # one cylinder, take a long screw driver and put it down the spark plug hole, you will need
Question about Mazda Tribute
...pulley installed if cant afford a fix)Oxygen sensorsCatylitic converter needs servicedPossible linkage to throttle has seen its timeMost of the items can be checked diyAlternator start engine warm ...
...Crankshaft Pulley In-vehicle Repair Special Tool(s) Holding Tool Crankshaft Pulley 303-893(LRT-12-080) Adapter 303-191-03 Bolts and spacers 303-191-04 Remover, crankshaft pulley 303-588 Remover, ...
crankshaft pulley and a/c pulley/belt rotate normally when a/c is not engaged. Once engaged, crankshaft pulley is slipping. Please help CHECK SEE IF CRANK SHAFT PULLEY BOLTS LOOSE.IF CRANKSHAFT PULLEY
...crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock ...
...crankshaft pulley. 2) Install the pulley bolt. To lock the crankshaft, use ST. ST 499977400 CRANKSHAFT PULLEY WRENCH (1) Clean the crankshaft pulley thread using an air gun. (2) Apply engine oil to ...
486 questions posted
Usually answered in minutes!
609 Questions
615 Questions
327 Questions
287 Questions
156 Questions