2002 Mazda Protege "timing marks 1" Questions

...timing marks for the belt so i hope this helps The timing should have been aligned to position #1 cylinder at the top of the compression stroke with the timing mark on the crankshaft pully pointed at ...

...on the gears and loosen the timing bearing. It will get adjusted by itself with the help of spring attached to it. Do not put extra force on the bearing to adjust it more. 8. Confirm the timing

...are the timing marks for a 2000 Mazda protege 1.8L I assume you are replacing the timing belt, so just wactch the youtube video at the link 1999 03 Mazda Protege 1 8L 2 0L timing belt replacement pt ...

...#1 plug stud in dist cap then snug bolts start engine and using a timing light advance 10 degrees on your harmonic based off your timing marks on timing cover (may need two

...timing marks were all aligned for each individual cam and the crankshaft gear. I even turned the engine with a breaker bar a couple of times to make sure the marks stayed lined up. Took out a spark ...

...timing marks are aligned. This will create spring pressure and will want to move the cams to a neutral position. This is why you need the retaining tool to hold the cams in the proper location while ...

...timing marks for a 1.5 mazda 4 cyl engine there are two different size cam gears not possible to have two different size gears on the cams . I take it that it is a twin overhead cam to have 2 cam ...

...your timing marks before you remove. When installing timing belt hold camshaffts with vise grips to align. installation opposite of removal. see this video ...

...timing marks were all aligned for each individual cam and the crankshaft gear. I even turned the engine with a breaker bar a couple of times to make sure the marks stayed lined up. Took out a spark ...

...timing marks for this engine. All the help is greatly appreciated. Thanks Rodger first of all with 3 cylinders 25lbs -1 100lbs. you have a problem with the vavles i think you have some bent vavles ...