2002 Mazda Protege "replacing tensioner pulley" Questions

Ad

Question about Mazda Protege

1 Answer

tensioner around the engine (it looks like an idler pulley) there will be a 13-15mm bolt that moves the tensioner to the 'slack' position, while you are holding that tenioner slack you need to

Ad

...alternator. tighted that one and sounds like its scubbing when i turn the wheel and still sqeaks It is probably your tensioner or idler pulley worn out. Check and see if pulleys are worn and ...

Ad

belt between water pump & alternator squealed and popped off - di didn't break. Bought new belt, but if it popped off, does that indicate either water pump or alternator failure? You could have ...

Question about Mazda Protege

1 Answer

How do I Change the alternator belt on my mazda? IF IT IS ON THE OUTSIDE OF THE OTHER BELTS, ALL YOU HAVE TO DO IS UNBOLT THE TOP OF THE ALTERNATOR, AND PUSH IT IN TO LOOSEN THE BELT FOR REMOVAL! IF ...

Question about Mazda Protege

1 Answer

...pump, and tensioner pulley. the dealer will just replace the belt, they might recommend to replace the water pump if there are alot of miles on the car, they will also inspect the pulley for

Question about Mazda Protege

1 Answer

...pulley is good. Alignment is perfect , I checked it with a laser alignment tool. I also tried tensioning it real tight but still sqeals like a banshee. Maybe you have some ideas, the noise is very ...

...pulley, 3 alternators. My car is still breaking belts. Its breaks the most belts in the winter when I cut on the heat. Now its starting to break belts on a weekly bases. Replace belt tensioner, any ...

...pulley,next remove timing belt covers along with tensioners. Remove valve cover. timing belt tensioner, now you have access to the water pump. remember your timing marks before you remove. When ...

Question about Mazda Protege

1 Answer

how to fix a broken alternator belt? You can't fix a broken alternator belt, all you can do is replace it. Go to autozone or advance or any other chain parts store, get your replacement and put it ...

Our 1997 Mazda Protege keeps breaking serpentine belts, gauls them up Remove the belt and make sure all of the accesories spin freely. All should spin freely except the crank shaft which is the lowest

Not finding what you are looking for?
2002 Mazda Protege Logo

875 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...