Actuator Control motor circuit high. It does not mean high idle. It means high motor current draw. However if it goes into limp home mode then the throttle will be set partially open to about 1800 rpm
Question about Mazda Protege
...mode. No check engine light on either I was driving home and i did hit a pothole, but while I was driving the electronic throttle control light started to blink and then turned off. I parked the car, ...
Question about Isuzu Cars & Trucks
idle..black smoke kept coming out for about 2 minutes and then stoped.engine was now running smoothly as well..started driving again and the limp mode seemed to not be engaged any more..revs and speed
...idle 1998 Chrysler Concorde 184,000 miles - on the way to work today, the car's speedometer quit working, it stopped shifting out of Low gear, it dies when idling. The Check Engine light also came on ...
...idle mode--The ECM will perform the following actions: - Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned off. - Ignore ...
Question about Mazda Protege
...Idle Mode--The control module will perform the following actions: - Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off. - Ignore ...
...mode went off. Was able to make it home. Also, my service engine soon has been on since my alternator was replaced about 2 months ago. Please advise. It should be noted that the ETC system includes a ...
...mode probs. 1/ Rev counter dies and car gets weak. 2/ ASR light comes on at a different time and car gets very weak. Hard accelleration can cure problem one. Stopping engine cures problem 2. Both ...
Question about Cars & Trucks
...idle at a light, it was smooth, take off was smooth up to 25 mph where it started the same jerk for a second of accelerating. I am not saying this is the solution or this is the problem but the PT ...
Question about Cars & Trucks
...light comes on and I can't get the speed above 30mph and it idles up and down in neutral Plug it on a COM tool to read the fault code.Mass air flow sensor, or oxygen sensormay need cleaning or ...
875 questions posted
Usually answered in minutes!
373 Questions
369 Questions
284 Questions
255 Questions
249 Questions