2006 GMC Envoy "swapping rear fuse box" Questions

...Neither the front controller or rear with front aux on will turn on fan. Checked rear hvac fuse and swapped relays in rear passenger fuse box. Ideas? 2004 Cadillac STX ?????? no such vehicle for ...

...rear driver side seat. Pull the seat forward it's right there. There’s a fuse box underneath the hood of your suv on the drivers side, check to see if the relay is blown and you can check it by ...

...rear brake lights went out at the same time, wouldn't that most likely mean a fuse has gone out? And if so, how do I know which fuses are out? check under the hood in the fuse box pull the fuse and ...

...rear brake lights but no parking lights or plates lights Hi, check the PARK LPS fuse in the box under the hood. If the fuse is good, try swapping the relay with a similar one. If they still will not ...

rear lift up hatch will not unlock using either the electric door locks--on the doors or the fob In the i/p fuse box there is 2 relays, a lock relay and an unlock relay. The relays should be the same.

...rear AC blower dosent work. I dont seem to have power to the motor, all fuses are good. Hi, Thanks for using Fixya! check the wire terminals from the fan motor, its possible that they are loose. Also ...

...Rear blower works fine. I swapped the 40A fuse in the underhood fuse box with the 40A fuse for the power seats since I don't have power seats. No help. I then swapped the front blower relay with the ...

...rear parking lights ok. Fuse behind glove box ok. Tried to confirm 40A fuse in engine compartment...swapped 40A from EXT LIGHT with 40A from ACCESS. Parking lights still inop. When putting 40A into ...

...swapping relay #3 inside the car with relay #2 (rear defroster). If that works, buy a new relay for the defroster. These relay are on the back of the fuse panel. Power window not working switched out ...

rear driving lights do not turn on. bulbs are good. can't find a blown fuse or any even figure out which fuse these lights are on check the 10 amp fuse labeled "EXT". also try swapping the "TNS" relay