Question about GMC Envoy
change the air from the floor to the dash vents when requested. There are times when the air will come out of the dash and the tempera There are times when the air will come out of both dash and floor
...mode door actuator ($40), disconnected battery, held cables together for 1 minute, closed doors, started engine,and did not touch anything for 3 minutes ( 1 minute min.). System cleared DTC'S and I ...
...change the vent from floor to vent and defrost. If this does not work you will need a mode motor. Good Luck my dash vents wont work either, i have tried to remove the hvac fuse. but it wont come out. ...
...actuator solenoid. Any other solutions? Take it an have it check at a qualified repair shop for DTC'S - diagnostic trouble codes . Could have problem with the liftgate/endgate module. Don't try ...
...sure that the front and back sides are cleaned. The other thing that happened when the battery was changed is that the HVAC system had to recalibrate itself. Sometimes this causes the mode control ...
...change from floor to vent to dash. It just keeps blowing out the floor vent. Thanks in advance for any help. Removal & InstallationRemove the floor air outlet duct extension from the floor duct. ...
Question about GMC Envoy
mode actuator. ?€¢ B0408 is for the left air temperature actuator. ?€¢ B0418 is for the right air temperature actuator. The HVAC control module controls the HVAC door actuators to regulate the airflow
Question about Dodge Cars & Trucks
...mode does not change when changing the control from defrost to vent to floor etc. Have removed entire dash. Believe there is a problem with the vacuum actuator motor or mode door actuator. How do I ...
Mode Door Actuator. I'm having an issue where my AC will not change from floor to vent to windshield and is kind of stuck in between. I keep trying to find information about the Mode door actuator and
...mode actuator connector. Detach the console mode actuator from the center console. To Install: Attach the console mode actuator to the center console. Torque the screws to 17 in-lb (1.9 Nm). Connect ...
942 questions posted
Usually answered in minutes!
2,225 Questions
1,368 Questions
1,418 Questions
540 Questions
159 Questions