2002 GMC Envoy XL "center brake light bulb" Questions

...brake pedal is pushed. If the taillights are on, the fuse is good, and the center high mount stop light works then the problem might simply be the tail lamp bulbs themselves.  I believe this ...

CENTER BRAKE LIGHT DOESNT WORT In the 2002 you cannot replace just the light. The housing needs to be replaced as well. For some reason GMC built the housing around the light so you can't just replace

...center high-mount brake light may be accessed from outside the vehicle, through the trunk, or through the passenger compartment. Remove the center high-mount bracket light lens retaining screws.Fig. ...

...center brake light works. The rear left and right brake lights do not. Fuses are fine. Checked bulbs and they look fine and have continuity. If not the fuse or bulb and the third brake light works ...

...center light bulb and it work. However, the two tail light still doesn't turn on. When I turn on the main light switch, all lights are functioning except when you depress the break pedal, the break ...

center brake light bar does work). What is the fix? If a fuse, which one? If bulbs, are they hood mounted or fender mounted? If the center light works then the brake light switch is working. The brake

...center brake light bulb on my 97 Oldsmobile 88? High-Mount Brake Light NOTE: Depending upon the vehicle, the center high-mount brake light may be accessed from outside the vehicle, through the trunk, ...

the center of the dash part # for 3rd brake light is 921 it may hold two or three bulbs , the heater control should be a # 94, hope this is helpful. 1156 on the brake light and 194 for the dash light;

...fine. Hi,Get the original bulb for that 3rd brake light from the dealer parts center.Tell them( parts dealer center ) the model of your vehicle and they will provide necessary part.Hope that

...brake lights except for the 3rd center light works bulbs are good center light works bulbs are good no power to sockets Possible that the brake light pressure switch is faulty, wires snapped to the ...