2001 GMC Jimmy "caliper loose" Questions

Ad

Question about GMC Jimmy

1 Answer

loose and Remove them. #5) Now after the Caliper Bolts are removed ,Loosen the Brake Line going to the Calipers using a Flare wrench.You'll need to have a Drain Pan handy to Catch the Brake Fluid. #6)

Ad

...loose from the outer shell inside the hose. (It cannot be seen by "looking" at the hose.) The inner lining then starts to act similar to a "heart valve" where it allows fluid to be pushed down into ...

Ad

...caliper is bad.... IF letting the bleeders loose lets the wheel spin free,tighten the bleeder back up, now pump up the brake pedal till its stiff and now the wheel should be hard to turn again, now ...

Question about GMC Jimmy

1 Answer

...loose once installed. If they don't than remove the shims and clean the rust from under them. Then reinstall the shims and see if the pads slide a little easier in the brackets. Lastly make sure you ...

...caliper and rotor to check you parking brake Assembly for loose or broken parts. the parking brake is a drum style on the inside of the rotor so unless you take them apart you can't check them. this ...

caliper on the front right would that lead to loosing all the pressure in my brakes on occasion yes possibly but it wouls also pull to one side when braking. The only way you would loose pressure will

Question about GMC Jimmy

1 Answer

...do they need 2 cooper washers or just one?? oil is getting to the line were it connects to the caliper but when we want to bleed, nothing comes out!! Please help You should have a crush washer

...vibration, now clanging... I went out of town for thanksgiving and while gone I had my rear brake calipers seize on me to the point I had smoke coming out the rear area. Had both calipers / pads ...

Question about GMC Jimmy

1 Answer

...loose fitting). Tighten the line, then release the brake pedal and wait 15 seconds. Loosen the fitting and repeat until all air is removed from the master cylinder bore. When finished, tighten the ...

loose. Gently work the caliper off the rotor, and lay it aside on the upper control arm if the brake line is long enough, or place it on a tall can or other stable object placed slightly behind and to

Not finding what you are looking for?
2001 GMC Jimmy Logo

1,251 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...