1995 GMC Sierra C1500 "v6 distributor rotor alignment" Questions

Ad

...V6 on a distributor Remove the cap and mark the rotor to the distributor housing so you reinstall it in the same place.Remove the rotor from distributor and put it on a vise.On the bottom where the ...

Ad

Question about GMC C1500

1 Answer

...V6. This should now be setting correctly to fire on #1 while TDC. You'll have to be close on meshing the cam tooth because the distributor can really only fit against the back of the intake housing ...

Ad

...distributor in both the V6 and V8 Vortec motors or a least the plastic base of the distributor. There will be (2) numbers here and sometimes hard to see. Align the pointer with what size engine you ...

...v6 Removal disconnect the wire harness on the distributor.remove the distributor cap.Bring the engine to top dead center on the number 1 compression stroke. Align timing mark to 0. put a scribe ...

...distributor and turn it 180 degrees and repeat install.You can avoid this by removing the valve cover and watching the #1 intake valve as you are turning the crank. The intake valve should just be ...

...V6 at idle at a stop light. i am installing a new one and have the timing marks alignd corectly however the rotor isnt pointing at #1 on the distributor its acually just past #1 about half way to the ...

...v6 4.3 there is no routine timing adjustment for the 4.3L engine, timing is controlled by the computer. If you are talking about timing after replacing the distributor, there is just the basic rotor ...

...distributor on a 1998 cirrus For the 2.5L v6 engine: Disconnect the negative battery cable. There is a remote negative connection at the left strut tower with an insulator grommet. Place this grommet ...

...1 AND NUMBER 6 SPARK PLUG TOWERS ON THE V6 ENGINE.INSTALL THE DISTRIBUTOR DISTRIBUTOR CAP, SPARK PLUG WIRING AND CONNECTORS.THE DEALERSHIP HAVE TO REPROGRAM TIMING.SINCE ITS CONTROLLED BY THE

distributor. Be sure to mark where the rotor is pointing when taking it out, ( on base of intake and on firewall) it has a worm gear and will move about 1/2 - 3/4 inch when you drop the new one in. If

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

668 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 GMC C1500
1991 GMC C1500

77 Questions

1988 GMC C1500
1988 GMC C1500

67 Questions

1989 GMC C1500
1989 GMC C1500

61 Questions

1990 GMC C1500
1990 GMC C1500

59 Questions

1986 GMC C1500
1986 GMC C1500

36 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...