1995 GMC Sierra C1500 "removing push pins" Questions

rear axle remover 0f a1996 chevy 1500 pickup if you mean pull the axle out of the housing you must take the cover off the rear end drianing the lube at the same time and turn untill you can remove the

brake push rod how do i get the push rod off the brake pedal on a 1996 chevy silverado You will need to remove the the retainer clip and remove the brake switch and the rod will then slide off the ...

i am having trouble figuring out how to remove the key switch i cant figure out how to remove the key and lock cylinder on my truck Remove the screws on the underside of the steering column cover and ...

How do you get the air bag off steering wheel so I can replace key cylinder Pull the negative battery cable then pull SRS fuse. Wait 10 minutes, then remove the screws in back of steering wheel, then ...

remove door panel 1986 chevy truck get a tiny flat crow bar and just go around the door untill you feel a plastic push pin and just pry it off

How do I replace a faulty ignition swith You will have to remove all the cowlings from the steering column to access the ignition lock and switch. With the correct key inserted and selected to, ...

...push out to remove the coupling that pushes into slave cyclider. Then you have to heat up silver soder or brazing that holds tube into square fitting that goes into slave. After removing do the ...

how to fix distributor gear distributor gear Without better information, I will assume you are saying the distributor gear has teeth missing or stripped. While replacing the gear is easy, you should ...

...removing the three 15-mm nuts in the support bracket, using a 15-mm socket. Make sure the ignition switch is in the lock position. Remove the two screws in the dimmer switch, using a socket. Allow it ...