...heater blower motor not working with control switch motor is 0k Sounds like the blower motor resister went bad. It is located under the hood on the passengers side firewall above/behind the strut ...
Question about Mercury Cars & Trucks
...put the car into park. Have pics of the front face of the AC Compressor, but nowhere to send them. Any ideas, thoughts, etc. would be greatly appreciated! Thank you my guess would be that the heater ...
Question about Ford Fusion
...heater. It has a snap spring clamp on it. You will be able to handle it better if you buy a new hose and cut the old one off. A small curved needle nose plier or straight plier may help. Then put the ...
...HEATER CABLE GOES THROUGH THE FIRE WALL THE CABLE SHOULD GO TO A FLAPPER WHICH IF PUSHED ONE WAY GIVES COLD AIR IF PUSHED THE OTHER WAY GIVES HOT AIR PUSH IN THE OPPOSITE DIRECTION TO WHAT IT IS NOW ...
...put a garden hose to the top connector of the heater core and flush dort, debri and rust particles out of the bottom and then I did the same to the bottom connection in reverse so whatever was lodged ...
put it in. I watched him. However the person that was helping me initially said the old one was in wrong, spring facing the radiator. Wish I had seen that myself. The thermostat had never been changed
...heater core and use a garden hose to backflush it the blend door can be more of a hassle as it can be operated by a motor or vacuum servo and even a simple cable these also have been known to break ...
...heater???? I purchased the truck used last year.I haven,t driven it alot.it has about 54,000 miles on it and is in great shape. The noise occurs approximatly around 30 mph. Again it sounds like ...
...heater temperature control. Put the temp control either to full hot or full cold. The outer cable housing is held in place by a clip, pop it off with your fingers, then you can unhook the cable end ...
89 questions posted
Usually answered in minutes!
750 Questions
244 Questions
135 Questions
91 Questions
48 Questions
