2005 Ford Fusion "joints" Questions

...me. Does anyone have any ideas please help. Stationary lock to lock turning, will not damage the CV joints, they are designed to turn in this manner, to test a CV joint to see if it has damage, go to ...

Can a damaged CV joint damage the transmission? Not usually. You don't want to drive it with a bad cv joint,if it breaks, you may get hurt, if you have an accident.

how to replace passenger side cv joint remove the axle from the car and use the services of a cv joint reconditioner shop

My 07 Fusion has 100,000 miles on it and I think I'm hearing a slight grinding noise when I make a left turn. Could this be the CV joint? More than likely that this could be a worn CV joint needing ...

...line as well at lower levels. Any ideas on what it could be? Sounds like it could be the CV joints, drive the car in reverse for a little and put steering on full lock, the noise will be a ...

the lower ball joints dont want to come out of the hub even though we are using one of those tunning fork ball joint extractors close the nut so that the "tuning fork"is about 1/2" inside and someone ...

2007 ford fusion awd v-6 driveline or suspension area or assembly makes a noise (possibly a bearing) when car is in motion. When not moving and motor is running, there is no noise. Appears to be ...

...at all your front suspension struts,shock absorbers,or lower wishbones with bushing and ball joints? I had recently a diesel ford focus 2007 with similar case and both front wishbones were ...

...Any suggestions? Struts and springs or is there a way to lube the contact points for the joints? ( They appear to be sealed and unable to lube) Thanks! Top strut bearing does this - and so ...

...doing tight three point turn or manovers popping noise when turning is usually caused by worn CV joints. Inspect CV boots for tears. Torn boot will allow dust to get in and cause wear. If boot is ...