...01 F150. Could get it to go off by pulling up on pedal, before I change master cylinder. Now that doesn't work. Have reached switch and pushed it in and still won't go off. Its more than likely your ...
...01 VW Golf, is there a cable in this make? Thanks The Golf has a hydraulic type clutch, it works off a master cylinder and uses a slave cylinder to engage and disengage. It has a hydraulic line, hose ...
Question about Ford F-150
...01 dodge stratus rt 3.0 v6 it's like it won't engage a lot of play when I go to push the clutch in check for fluid level in the reservoir bleed the air out of the system replace the clutch master ...
01 santa fe, and now when i engage the clutch with the engine running, it doesn't want to go into gear very smooth. But once i get it in gear, it shifts through all the gears smoothly. any ideas as to
Question about Cars & Trucks
...01 wat is it anti clock brakes either a sensor is faulty or you have air in the lines bad fluid {old} a master brake cylinder or its servo cycliders and or some ec {controller} connection is wrong in ...
01 alero and on the way home i went to downshift from 5th to 4th and the clutch pedal basically fell to the floor with very little effort and stuck there,, it shifted perfectly fine up till that point
...master cylinder inspection and complete brake system inspection of kia sportage:-----http://technoanswers.blogspot.com/2012/01/master-cylinder-overhaul-and.html ---------This will
Question about Ford F-150
...01 Sephia I checked the slave cylinder, but there is no signs of leaks, besides the fluid compartment does not go low in a long time!! It's not the first time it happens, but it always seems to kind ...
01 PT Cruiser I was driving home from Walmart pushed the clutch in to shift heard a weird thump and then it wouldn't shift gears. When it is stopped and car is turned off it will run through them with
Question about Lexus Cars & Trucks
01 Lexus LX 470 veered right then left on slight freeway curve. Luxus dealer scoped it & said needs master cylinder & ABS actuator. Took to ABS Power Brake who said, needs traction stability analysis ...
1,542 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions