2001 Ford Expedition "wait start light stays" Questions

...and running board lights stay on Sounds like you may have a shorted door sensor. Start at the driver door unplug the sensor wait about a minuteto see if the lights go out. If not check the next

wait one minute and it starts fine. done it once then months later done it again, months later again the same, now doing it every day. Changed PCM relay, still cutting off, no service engine light, no

...for bad switches in the door latches , It can be a pain to locate witch one. Close all doors and wait for the lamps to go out..( takes a couple minutes but they will go out on timer ) starting

...wait about 5 min and it will start.  I have had it at the Ford dealer for about a month and they still dont know what the problem is.  I have paid about 900 so far and the only thing they ...

...start the car and it was attempting to turn over but was not starting. I took the key out and noticed the heater was on faintly pushing out air. Then a clicking noise started which sounded as if it ...

...start the truck. Has the vehicle had a Check engine light coming on at all? If no, disconnect the Mass Air flow sensor electrical connector and try it again. If the truck now starts,the concern is in ...

start, or dies very quickly after it started, then leave the key in the ignition in the "ON" position and wait 10 minutes. Make sure the security light is flashing. After 10 minutes the security light

...wait to start light is not staying on. Also was hearing a clicking sound. Thought the glow plug relay was bad and when i replaced it the main hot terminal was broken. Put the relay in and same thing ...

...WAIT TO START" DO YOU WAIT TO START? IF NOT,THEN THE GLOW PLUGS ARE BUR'NT OUT,WHICH YOU WILL NOT NEED UNTIL FALL. OR MAYBE YOU'VE GOT IT HOOKED ON EITHER,STARTING FLUID,IN WHICH CASE,I SUGGEST YOU ...

...can't find anything ? put key in trun to on do not start or try to start just trun on. wait 10 to 20 min.s with key on this should reset the theft system.after you wait turn key off then try to