2001 Ford Expedition "transmission gear car doesnt move" Questions

...how, but when i stopped the car, put in park and turned off the problem repeated. Now can;t get out of park. Sounds like transmission, if it doesnt move from park gear, You just need to change a

transmission. I still have the same problem as before. The vehicle runs in reverse and 1st gear, but when I put it in drive, no power. It will rev up in reverse/1st, but if I change gears, it just won

...transmission has been damaged permanently. That is to say....if you have repeatedly put the car in gear and revved the engine and or driven it while it is slipping badly, it doesn't take too much of ...

...transmission gear range lever transitions while testing. Pull DTCs from GEM (even if there are no DTCs available). Clear any codes present and cycle ignition. Road Speed: Reported symptoms for a ...

gear and its an automatic! Check the transmission fluid level if it is ok check if vehicle will move in any other gear reverse 1 or L etc. If not it maybe a torque converter issue and maybe best for a

TRANSMISSION DIED , TRIED EVERY GEAR NOTHING MOVING THE CAR START NORMALY AND I CAN SHIFT IN ANY GEAR SMOOTHLY BUT CAR DOESNT MOVE run the fault code look for a problem torque converter servo/solenoid

...gear change intermittently the transmission indicator starts moving between P, N, D, 2, 1 without any pattern and the transmission "KLUNKS" in the lower gears. trans nuetral saftey swich needs ...

transmission wont shift into any gear if you can shift gears with car off might be the clutch or slave cylinder. If you can start the car in gear,clutch pushed in and doesnt try take off probally not ...

...gear and move, occasionally i can get it to but it skips pretty bad and doesnt want to switch gears, sometimes it clears out and runs great shifts gears well and everything but then will just rev up ...

...gear on reverse, it doesnt move nor respond. But it moves slowly when its on drive and move good when on 1 and 2 PROBLEM WITH TRANSMISSION. Check the ATF level. if low add fluid. if fluid level ok, ...