...instrument cluster. This module carries out all of the PATS functions such as receiving the identification code from the encoded ignition key and controlling engine enable. The instrument cluster ...
...core at you must remove the dashboard, instrument cluster, passenger airbag, etc. remove the heater and ac evaporator cover, http://www.f150online.com/forums/showthread.php?t=215665 this will ...
My 2000 Ford light does not want to come on by my odometer.What is wrong ? busted bulb need to remove the instrument cluster and replace it.
...do you see screws? take those out and the bezel will pop out, look around the instrument cluster and undo the screws you see, then you can lift out the entire dash board. Hope this helps, let me
...instrument cluster to access where the bolt goes. Normally before the bolt falls out you will notice you have some slack in the shift lever. The bolt that usually falls out on the fords has a ...
...instrument cluster was bad so i bought another one and thats not the problem either because the fuel guage still dosen't work and like the other one before i change it every other guage works on the ...
instrument cluster out and remove the back of it( t15 torx screws). Along the bottom edge of the printed circuit board you will see a small ribbon cable that connects to the printed circuit board. The
instrument cluster. Once you remove those, gently pry the panel loose with a small flathead.. there are probably 8 plastic clips that hold it on. Once the panel is loose, you'll need to disconnect all
...instrument cluster and re-soldered the pins on the ribbon connector. It was actually very easy to do and only took about 30 minutes overall. I now have 160k miles and the odometer is still going ...
1,903 questions posted
Usually answered in minutes!
2,188 Questions
1,825 Questions
1,627 Questions
1,696 Questions
1,048 Questions