...gas in the tank the better, just remove driveshaft, put a moveable jack setup to hold tank up when straps removed (note the more gas the heavier) these tanks are big make sure its supported. then ...
GAS GAUGE NEVER READS FULL AFTER FILL UP. IS THIS SOMETHING I CAN DO ON MY OWN TO FIX. There is, but it is not worth the work involved. Purchase a replacement gage and install it. This of course ...
...the straps you may need something to remove the rusty bolts such as wd40 but first open the gas tank fill lid and remove the screws that hold the neck of the tank to the area where you put in the ...
...things that came undone were the 2 hoses going in the side of the tank(filler hose ) we put gas back in and gauge works but will not start? is fuel pump in tank? if so pump may have stopped ...
...put on supporting devise and lift just high enough to reattach all your connectors...then jack up the rest off the way attach holdings straps ,cover,ground ******** filler neck,filler neck ...
...put the e on remove hose from tank ,you gonna see two metal straps that go around gas tank, remove bolts from straps becareful cause if tank is full it's gonna drop i suggest you get help to bring ...
...gas tank? Put the truck on service ramps or a lift. Pump out any fuel in the tank. Remove the plastic cover from the tank straps, 10mm socket. Unhook filler and vent hoses. Unhook ...
...do I change my gas tank on my 1998 Chevrolet Blazer? disconnect the battery, put a piece of plywood on a jack and place under gas tank, remove the straps, lower the tank, remove fuel pump, change ...
...empty tank of gas when dropped slowly you unhook gas lines and dis connect wireing then pull tank out remember to put vechicle on jack stands firmly 1st then go slow remembering the way you got it ...
1,903 questions posted
Usually answered in minutes!
2,188 Questions
1,825 Questions
1,627 Questions
1,696 Questions
1,048 Questions
