2001 Ford Expedition "oil drain plug torque spec" Questions

...oil plug go,,drain out all of the oil,,,then remove all of the oil pan mounting bolts, leaving one on each side MIDDLE,, so the pan doesnt fall on your head. Then carefullt remove the last two bolts ...

CHANGING OIL ON 2006 GTO, WHAT TORQUE SHOULD THE OIL PLUG BE TORQUES TO Hello and welcome. here is the oil drain plug torque spec for your vehicle Oil Pan Drain Plug 25 N·m 18 lb ft

...Oil Drain Torque Specs Toyota Nation Forum Toyota Car and Truck Forums The blog above lists 27 - 30 ft. lbs. torque for the drain plug. As someone in the blog stated, 30 Ft. Lbs. sounds excessive , ...

oil drain plug gaskets before you torque it down (to specs) each plug has a torque spec; but i got away with re-using it a few times before i replace the gasket. I spin the drain plug on by hand first

...drain oil from drain plug on oil pan when drained remove and replace oil filter also. remove the pan bolts pull off pan and gasket.put new oil pan gasket on if needed.when oil pan bolts are back in, ...

OIL PAN TORQUE SPECS 2011 CRUZE 1.4 ENGINE 18nm or 13ft pounds the pan has the torque stamped on the oil pan, near the oil drain plug.

oil pan drain plug with a new O-ring and torque the plug: a. On a plastic oil pan, torque plug to 45 N·m +/- 7 N·m (33 lb·ft +/- 5 lb·ft). b. On an aluminum oil pan torque plug to 60 N·m +/- 9 N·m (44

...oil drain plug torque for an unidentified vehicle? If you post the year--make--model, I'll try to find that torque spec? When changing your own oil and filter, if there is a leak, the liability is ...

locate oil drain plug the oil pan is on the passenger side its right under the pan, be carfull its an alluminium pan and the plug strips out easily, it has a torque spec

...Pan Bolts: 7Nm (5.2 ft lbs) Oil Drain Plug: 25Nm (18.4 ft lbs) Timing Chain Tensioner Bolts: 7Nm (5.2 ft lbs) Camshaft Sprocket Bolts: 25Nm (18.4 ft lbs) Crankshaft Pulley Bolt: 215Nm (159.2 ft