2001 Ford Expedition "fan speed durango works" Questions

01 Dodge Durango blower used to work on all speeds then would only work on high and now it does not work at all Sounds like the resistor is burned out that controls the different fan speeds.

...dash the fan only runs on hi-speed if the fan is working on high speed then you don't need to replace it. You need to replace the resisters that control the fan speed. It's far more cheaper by the ...

...that contain the fan switch. What else could be wrong The resistors or the relay . The resistors for all the other speeds are defective. High speed doesn't go threw a resistor that is straight

...fan will only run on one speed and the air is not as cold as it originally was. the back air only comes out warm. the dealer said its a speed module problem and also that our compressor needs to be ...

...I have a 2002 Dodge Durango that the blower on the heater only works on high. What needs to be done to fix? its time for your to replace your blower motor due to secondary fan going out at low

2003 dodge durango front heater/ac blower motor stopped working what can i check beside fuses Check the Blower Motor Resistor. This controls the Blower Motor/Fan Speed.

air conditioner fan stopped blowing in my 2005 dodge durango.. if it doesnt work on any speed , try tapping on the motor base , above the passengers feet , if it starts up , its the motor.

...fuse panel has no Heater fan quit working, checked fuse all were good? what could the problem be? it could be the fan motor, the resistors that control the speed or the switch as well as a loose ...

...durango, fan willnot run I have checked the fuses and know that the fan works. i am getting 12 volts at the fan connector. Have you checked the fans while running the A/C on both high and low speeds? ...

...fan only on the high speed resister side.you would have to remove the resister to inspect it for damage(broken resister wire)this would be the thickest wire on the resister block.it is located in the ...