2001 Ford Escape "grinding rubbing noise coming rear" Questions

grinding noise, i cant tell if the self adjuster is adjusting, and i think the emergency brake has alot of tension keeping the brakes rubbing on the drum, i took the temperature and it was 280 degrees

...Rubbing/grinding noise in rear end brakes Feels like a rubbing/grinding and sometimes a thumping noise. I just replaced drums and shoes thinking that it was a bad drum but it is still doing it I'm ...

rubbing and grinding noise coming from my rear brakes could anyone tell me what kind of problem this is ? I'm having trouble with my brakes for a 1993 cutlass ciera s and lately I been hearing

...grinding/rubbing noise from the rear and the noise seems to be coming from the passenger side of the back. I jacked up the rear and turned the wheels to see if the brakes may be rubbing, but they did ...

RUBBING OR GRINDING NOISE THAT SEEMS TO BE COMING FROM THE REAR HALF OF THE VEHICLE THAT APPROXIMATES THE REVOLUTION OF THE WHEEL. I AM STUMPED. possibly a bad wheel bearing Check rear brakes and that

Grinding noise from rear. Brake pads? Bearing maybe? Seems to be coming from the passenger side rear wheel area. Any help would be great. Thanks. Have the rear brakes inspected. These are real easy to

grinding metal.  It end up being the brake dust cover got bent when they replaced the bearing and it was rubbing something, the fix for that was bending it so it didn't rub.  I hope this

Rubbing or grinding noise coming from Driver side rear tire/wheel When I accelerate from a complete stop while turning left, there is a rubbing or grinding sound that comes from the back tire or wheel

...grinding/screeching noise that started recently. it sounds like it is coming from the rear wheel and is intermittant. The fault can be that the brake padds are rubbing against the drum, If by braking ...

grinding or rubbing/rubbing noise coming from the rear of my 05 toyota tundra that starts at about 35 to 40 mph but doesn't get much louder or increase a lot in pitch as you changed out center bearing