2006 Dodge Stratus "popping noise putting car reverse" Questions

my car makes a popping noise when i put into reverse or drive? either a transmition mount or motor mount could also be a half shaft cv joint

...popping noise near the right reaR wheel when put in reverse or drive My 2005 Dodge Caravan started making a metal popping noise in the right wheel area last night when I stopped my vehicle and put it ...

putting a scanner on the vehicle, ANYONE is only guessing but here is my 2 cents worth... There a many popping noises and it could be Engine but since you lost Reverse at the same time... I would also

...noise when I would turn the stering wheel to the left and I just crank my car up one day and put it reverse and something popped and fell apart inside and it will not go in reverse typical FWD GM ...

...click-type noise from the front wheel area when accelerating from a stop or when shifting between drive/ reverse and reverse/ drive. Had a new drive shaft put on but still there check your motor ...

...go down so I can view the curbs when I put the car in reverse. The one on the passenger makes a loud popping noise as it is moving down or back up when I put the car in gear. Replace mirror ...

...popping back to where it is. its very loud. Starter runs well and no codes show up on the scanner. Have your motor mounts checked. With the hood open and the emergency brake on Watch for excessive ...

...popping out of gear. eventually ended up with just reverse. the car runs and starts however, it sounds like a grinding noise when i try put it into 1st or 2nd. the noise is coming from the drivers ...

...the car in drive or reverse there is a popping noise by the front tires, front wheel drive. what could be the problem take it in to a drive line professional shop for a cv check or wheel bearing ...

...noise when wheel is turned in reverse like backing out of a parking spot and then clicks or pops again when going to drive forward Also click or pops sometimes when put in reverse then to drive and ...