...coil,all fuse and relays are good, and i have the truble coods no. 12, 35, 33, 37, 55. Iam sorry for my poor language and thank you very mutch for your help. Do headlights turn on? radio work,wipers? ...
Question about Dodge Caravan
...coil, spark-plugs, ground wires..etc...vacuum leaks like the brake-booster hose and other hoses connected to the intake ...the p.c.v. valve is also a suspect if it is not jingling when shaking it ...
...ignition switch, Transmission Range Sensor (TRS) (you don't have a neutral start switch unless you have a rare manual transmission), ground input from the Powertrain Control Module (PCM) to the ...
...ignition coil,check the crank position sensor and last try moving the plugs aroud to see if the code changes or if you get a new one,i dont think you will be stranded but the engine performance is ...
Question about Dodge Caravan
...ignition coil. Have it tested by someone. It is very common for these coils to crack and cause a misfire. A flashing check engine light indicates a misfire that has the potential to damage the ...
Question about Dodge Caravan
...coil and the HT wires, if the intensity is bad this must be swapped and checked to confirm. DO NOT CHANGE any part without a confirmation by trying with a replacement from another vehicle or ...
Question about Dodge Caravan
...coil pack, Drained oil and filter, fuel injectors, fuel rail and fuel rail wiring harness. I also replaced the MAP sensor and I took the EGR Exhaust valve off along with the back preasure pipe and ...
ignition coil in my 2002 ford taurus Removal & Installation 3.0L (VIN S) Engine Disconnect the negative battery cable. Unplug the engine control sensor wiring connectors from the ignition coil and
...Ignition Coil - Removal & Installation Disconnect the negative battery cable. Disengage the TFI-IV harness or the engine control sensor wiring connector from the ignition coil, as applicable. On ...
ignition coil there is a wire there that controlls the tachometer im thinking that that wire is loose or coroded clean connection and make shure wire is clean ,there will be a clip on the coil careful
626 questions posted
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions