2004 Dodge Caravan "changed flywheel turn starter gear" Questions

...flywheel that the starter gear engages which requires much labor to change, so better sooner than later. Best wishes! i have a 1999 dodge caravan with a 3.8 engine and it wont start. i found gas in ...

...flywheel teeth, replace damaged parts if necessary). Bad ignition switch (Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or ...

changed the starter and cable leading from the battery to the starter.but cannot start the van.all i get is clicks sounds like a bad battery. try jumping it Sounds like the battery has dropped below ...

...turn over Change the starter. The starter has a gear that moves forward, meshes with the flywheel, and cranks the engine over. From what you describe, the gear is spinning, but not advancing on it's ...

...changed starter 3 times and timing is Changing starter,timing chain and checked timing with light dead on 10 btdc Really need to know how many miles are on it and is it an all original ...

flywheel, it will go on easily, just hold it all the way on against the edge it rests on and turn it about 1/3 turn and hold for about 15 seconds and that's it, it will not come off unless you beat it

...starter & flywheel this time ran the vin got the model #off trans to make sure I got everything right it is still chewing flywheel??tried several things like shims removing the spacer plater between ...

...turn the flywheel to achieve crank is broken and spins uselessly. When you turn the key you hear it spin but it can not turn the flywheel to start the vehicle. The other option is less likely but I ...

changed my starter on my 96 cavalier and it sounds like im still having the same problem... When i start my car i turn the egnition it starts with a loud scraping noise almost like its not disengaging

...flywheel. then its the starter solinoid thats bad. its on top of starter, when key is turned to start, the solinoid is activated, and it pushes the gears out to make contact with flywheel to start ...