2003 Dodge Intrepid "headlight gasket" Questions

Ad

Question about Dodge Intrepid

1 Answer

leaking headlights I assume it's from rain. There should be a gasket around the headlights could be dry or maybe screws need to be tightened. I believe you will need to go from the inside to ck this. ...

Ad

...headlight Remove the upper radiator cowl. (That?s the big metal piece running across the front of the car. don't forget the hood latch.) Disconnect the small hose on the driver's side, top of the ...

Ad

Question about Dodge Intrepid

1 Answer

...headlight with a new one, and the problem still persists. It's a "sealed" unit-----how does that happen and what recourse do I have?? I was told it is not a warranty issue. Try taking ...

Question about Dodge Intrepid

1 Answer

...headlight, and pull the small plastic tab to loosen the rubber gasket from the frame. 3 Unplug the wiring harness from the back of the bulb. Twist the bulb, to remove it from the headlamp assembly. 4 ...

Question about Dodge Intrepid

1 Answer

headlight in the engine area. you will feel a rubber gasket around a hole were wires go in. pull the rubber gasket off using the rubber tab. then unplug the wires from bulb. then theres a little metal

Question about Dodge Intrepid

1 Answer

...bulb? How do I change the headlight bulb on a 2001 Toyota echo. I has a connection to the back of the light bulb that is in a rubber gasket. rubber gasket can be peeled back to expose

Question about Dodge Intrepid

1 Answer

...into headlight possible bad gasket seal on light socket or bad seal on headlight lense and light housing. seal lense on outer perimeter with clear silicone or get new sponge gasket for light ...

...the ring to be able to get the old bulb out. be careful as not to damge the rubber gasket or you will get water into your headlight. If you need any pics I can post them for you. Hope this

...GASKET SURROUNDING THE HEADLIGHT PLUG IN THE BACK OF THE HEADLIGHT ASSEMBLY. pULL OFF THE GASKET AND LET IT HANG ON THE SURROUN DING HEADLIGHT WIRES. tHEN PULL OFF THE HEADLIGHT WIRE HARNESS BY ...

...the light bulb there are no cracks in the headlight Check the gasket at the base of the bulb holder. If there are no cracks or holes then that is the only place water can enter the headlight

Not finding what you are looking for?
2003 Dodge Intrepid Logo

419 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...