...inside the liftgate. When you hit unluck, do you hear the actuator moving? If not, it is probably rusted and/or stuck. If you can get to it, hit it with penetrating oil. This is a common problem on ...
...Liftgate has a,rusted hole under the license plate going down to the bottom lip . Easy fix ? If you are a panel beater or good welder it will be an easy fix. Cut out the rust and replace it with a ...
...but pulling the handle will not release the latch that holds it closed. It is not frozen or rusted? Unlock the doors with the power unlock button then you have to push in on the bottom part
...liftgate problem tailgate will not open remotely Does it power open at all. If not I bet its the latch. This is pretty common on these. Also I have seen when rust will build up on ...
...rust spots on the chrome parts like the liftgate door handle and the rest of the door handles plus the emblems. I tried to polish it with Blue Ribbon's rubbing compound. I've got a better result by ...
...just got jammed and should be able to be fixed with out having to replace. Assuming that it is not rusted and
...liftgate power lock relay feed) it is fine. The rear doors do unlock using both options. What do i do? Help. if it was mine I would take the rear inside door panel off and see if there is any rust or ...
...power locks good Take the inner door panel apart, and take the lock mechanism out. It is probably rusted solid. You may need to buy a new assembly. If you're lucky with a little patience and some ...
the back liftgate does not open even though it is unlocked. I lift the open handle at dothing happens. I had the same thing on my 96 GC. Turned out the latch and striker were rusted together.
liftgate latch handle sticking. The cause is that it is made of ordinary steel and is exposed to road grime, including salt. I have fixed my 2002 with WD-40 numerous times but now, it is frozen stuck.
957 questions posted
Usually answered in minutes!
904 Questions
942 Questions
867 Questions
830 Questions
647 Questions