2005 Chevrolet Corvette "reset car horn alarm" Questions

...horn. How do I reset it? check the condition of the alarm battery it self. It is in the unit and is there so that the alarm is sounded if the car battery is disconnected while the alarm is in ...

...car's security/keyless entry system needs to be reset, and it's not recognizing the keyless entry FOB. Check this LINK for how to re-program the FOB, which should allow you to turn off the alarm. I ...

...car if not reset so went back to put the fuse in and it went in and no horn this time so unlocked all the doors and still got nothing...Now i am lost and dont know what to do next!!! NEED HELP first ...

...horn fuse and it was fine. How can i get it to sound again? Have you tried resetting the alarm, or even disconnecting the car battery and reconnecting it... also make sure all doors and trunk lid is ...

...... Turn on your car. Put the key in the ignition, and turn the car on. ... Utilize common tricks. ... Disconnect the battery. ... Reset the alarm unit. ... Remove the alarm fuse. ... Thanks, ...

...car on. This should stop the horn and reset the security. It sounds like your alarm maybe turning on. Insert the ignition key into the ignition and turn it to on, the alarm should shut off, if it is ...

...reset it, check in the owner manual. There probably is a fuse that says ALARM. If so, take it out in the mean time. THE HORNS ARE LOCATED UNDER THE FRONT FENDER DRIVERS SIDE . THERE SHOULD BE A ...

...the car is started or a door is open, the horn starts again. It sounds like you have an aftermarket alarm system that has malfunction. Contact the manufacturer of the alarm for the reset

...reset so it won`t go off when it shouldn`t.the module thinks the car is being stollen as it went into anti-theft mode and needs to be reset.usually the light for this problem(gross vacume leak) will ...

horn keeps hanking Reset your alarm system. Remember, the horn will honk when you turn the alarm on. Just that power was disrupted when battery was changed and the computer has no idea what's going on